FIG. 0712 SERIES FLUSH LATCH SET
MOUNTING INSTRUCTIONS
Read all instructions before proceeding.
This series of flush latch sets is designed to be mounted on
doors 3/4 inch to 1-1/2 inches thick.
1). Tape Template 1 on door at the desired location.
2). Mark through template for two 9/16” diameter holes (“A”) and two 9/32”
diameter holes (“B”)
3). Drill all 4 holes.
4). Tape Template 2 on door at the desired location Lining up Holes “C” and the
centerline reference (C/L) with Template 1. Note:The bevel is not in the center of the
Case Assembly.
5). Mark through Template 2 for two 3/32” diameter holes (“C”) and two 5/8” diameter
holes (“D”).
6). Drill (“C”) holes 1 inch deep and (“D”) holes 2-3/16” deep.
7). Route door out to depth (“E”) shown on template between the two 5/8”
diameter holes using a 1/2 inch diameter routing bit.
8). Route door out to depth (“F”) shown on template using a 3/4 inch diameter
routing bit.
9). Remove handles and separate the escutcheons. Slide case assembly into door.
10). Fasten case assembly to door with (2) #6 flat head screws. (Supplied).
11). Refasten escutcheons.Attach 'L' handles to the shaft and install in latch set with
square washers.Tighten set screws on lever handles.
12). Mount strike plate to door frame with (2) #6 flat head screws (Supplied). Relieve
under the strike plate in order to allow the bevel to fully extend with 1/8” minimum
clearance when the latch is closed.
13). NOTE:The latch set has a safety unlatch feature on the outside that can be
activated by inserting a small blade screwdriver and turning.
Exploded View
Handle
Handle
Set Screw
Shaft
#6 Screw (Supplied)
Washer
Washer
Case Assembly
LEFT INWARD
LEFT OUTWARD
RIGHT OUTWARD
RIGHT INWARD
DETERMINING THE HAND OF THE LATCH SET.
NOTE: The privacy latch handle should always be mounted on the door’s interior side
Inside Chrome
Escutcheon
Privacy
Handle
Outside Chrome
Escutcheon
#6 Screw
(Supplied)
Catalog No. Door Size Type of Latch
0712001LIC 3/4 to 1 Left Inward or
Right Outward
0712001RIC 3/4 to 1 Right Inward or
Left Outward
0712002LIC 1 to 1-1/4 Left Inward or
Right Outward
0712002RIC 1 to 1-1/4 Right Inward or
Left Outward
0712003LIC 1-1/4 to 1-1/2 Left Inward or
Right Outward
0712003RIC 1-1/4 to 1-1/2 Right Inward or
Left Outward
Item Cat. Nos
Handle Assy for 3/4 to 1 Door* 071200198A
Handle Assy for 1 to 1-1/4 Door* 071200298A
Handle Assy for 1-1/4 to 1-1/2 Door* 071200398A
Case Assembly 071200088B
Inside Chrome Escutcheon 071200099C
Outside Chrome Escutcheon 071200099D
Privacy Latch Handle Assy (Includes Shaft)
Privacy Handle Assy for 3/4-1 Door 071200188A
Privacy Handle Assy for 1 to 1-1/4 Door 071200288A
Privacy Handle Assy for 1-1/4 to 1-1/2 Door 071200388A
Strike Plate 0912000CHR
SPARE PARTS
*Note: Handle Assembly includes 2 lever handles,
set screws, washers and shaft.
Note: Left Inward/Right Outward are Interchangeable.
Right Inward/Left Outward are Interchangeable.
Strike
Plate
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern